GJS TexiPrint Soft Coverall - Solvent Printable Heat Transfer Film with Sublimation Blocker

GJS TexiPrint Soft Coverall - Solvent Printable Heat Transfer Film with Sublimation Blocker

GJS TexiPrint Soft Coverall with Sublimation Blocker actually eliminates strikethrough when applied to sublimated garments. This media applies to almost any fabric type and works especially well on performance wear.

Once TexiPrint Soft Coverall is applied it provides a barrier eliminating dye migrations. Perfect for athletic and sporting apparel especially sublimated soccer shirts, football jerseys, motor cross uniforms, and more.

Recommended Fabrics

100% cotton
100% polyester
Polyester-cotton blends
Acrylics
Similar fibres

Comments
Set print temperature to 45°C and dryer 50°C. Let ink dry for a least 4 hours before pressing. Preheat garment. Do not wash garment until 24 hours after pressing.

Latex Inks
HP has certified this media to be suitable for Latex inks.

Roland TrueVis Inks
Roland has certified this media to be suitable for TrueVis inks.

Application
Use GJS TransferClear to transfer the image from the transparent carrier to the material. Printed transfer must be completely dry before applying Transfer Tape.

Material

Polyurethane

Roll Width

500mm / 750mm

Pressing Time

20s

Pressing Temperature

160°C

Thickness

100 microns

Pressing Pressure

Medium

Peel

Cold

Max Washing Temperature

60°C

Washing Instructions

Wash inside out without bleach or any aggressive washing products

Dry Cleaning

Ironing Instructions

Inside out only

Standard

Eco Friendly Oeko-Tek 100

Did you know that when purchasing a FULL roll of vinyl media we can cut it down to any size you need? Simply tell us the cut size in the order comment box during checkout and we'll slice the roll down to your precise requirements!