Two Can Epoxy Basic Reflex Blue
The Two Can Epoxy ink series exhibit excellent solvent and chemical resistance and offer a high degree of adhesion to a variety of difficult to print surfaces.
As the name indicates the Two Can Epoxy ink series is a two pack system that dries by polymerisation. A catalyst ER176 added prior to use, initiates the polymerisation process. The system will NOT dry or cure without the addition of catalyst.
After the addition of catalyst the ink system will air dry to a tack free state in approximately 2 hours, but 7 days are required for the film to fully cure to maximum adhesion and chemical resistance. If force drying or baking, the time to complete cure is as follows:
120 Deg. C (250 Deg. F) for 10 minutes
150 Deg. C (300 Deg.F) for 7 minutes
180 Deg. C (350 Deg.F) for 4 minutes
I would recommend GJS to others because of their helpful and knowledgeable staff especially Steve Poole who really analyse technical issues and other problems I encounter in sublimation.
Helpful staff, amazing turn-around on shipment - received within a day of the final Invoice (in North Queensland)! Thank you!
Why Choose GJS
Free FreightWe´ll deliver your order for free if you spend over $300 on our website and live in the Sydney, Melbourne and Brisbane metro area with competitive freight charges out of these areas. Check to see if your post code qualifies online.
If you require any further information on this product please click the button below and complete the form.