Two Can Epoxy Basic Purple
The Two Can Epoxy ink series exhibit excellent solvent and chemical resistance and offer a high degree of adhesion to a variety of difficult to print surfaces.
As the name indicates the Two Can Epoxy ink series is a two pack system that dries by polymerisation. A catalyst ER176 added prior to use, initiates the polymerisation process. The system will NOT dry or cure without the addition of catalyst.
After the addition of catalyst the ink system will air dry to a tack free state in approximately 2 hours, but 7 days are required for the film to fully cure to maximum adhesion and chemical resistance. If force drying or baking, the time to complete cure is as follows:
120 Deg. C (250 Deg. F) for 10 minutes
150 Deg. C (300 Deg.F) for 7 minutes
180 Deg. C (350 Deg.F) for 4 minutes
|Drying||Touch dry approx. 2 hours. Maximum final cure 7 days|
|Mesh||Mono filament fabric 62T - 140T|
|Stencil||Any non-solvent based emulsion|
|Coverage||Approx. 40 sqm per kg|
|Colour Range||9 Standard|
8 Basic Pantone Plus Black and White
Special colours as required
Why Choose GJS
24hr self-service knowledge baseAll the documentation to support your printing solutions can be found online in our knowledge base. Find instruction manuals, frequently asked questions, price lists, brochures, templates, colour profiles and general hints and tips.
If you require any further information on this product please click the button below and complete the form.