Two Can Epoxy Fluro Citron Yellow
The Two Can Epoxy ink series exhibit excellent solvent and chemical resistance and offer a high degree of adhesion to a variety of difficult to print surfaces.
As the name indicates the Two Can Epoxy ink series is a two pack system that dries by polymerisation. A catalyst ER176 added prior to use, initiates the polymerisation process. The system will NOT dry or cure without the addition of catalyst.
After the addition of catalyst the ink system will air dry to a tack free state in approximately 2 hours, but 7 days are required for the film to fully cure to maximum adhesion and chemical resistance. If force drying or baking, the time to complete cure is as follows:
120 Deg. C (250 Deg. F) for 10 minutes
150 Deg. C (300 Deg.F) for 7 minutes
180 Deg. C (350 Deg.F) for 4 minutes
I am a new client and was most impressed with the response to my first order. Thanks again
"Tracey Crossley @ Graphplas Australia
I would just like to say a big thank you to Stephen Tuck - my Ricoh just ran out of ink and I was a day away from the long weekend with a big job on the go. I rang (normally web order) GJS at 4.10pm and got put through to Stephen, who took my order and told me that freight had already left for the day :( I was in a bit of a panic, and asked if there was an Austpost near by that he could express post it to me........well the next day at 9.30am the courier pulled up with the inks on board. WOW!
Why Choose GJS
Free FreightWe´ll deliver your order for free if you spend over $300 on our website and live in the Sydney, Melbourne and Brisbane metro area with competitive freight charges out of these areas. Check to see if your post code qualifies online.
If you require any further information on this product please click the button below and complete the form.