Two Can Epoxy Primrose Yellow
The Two Can Epoxy ink series exhibit excellent solvent and chemical resistance and offer a high degree of adhesion to a variety of difficult to print surfaces.
As the name indicates the Two Can Epoxy ink series is a two pack system that dries by polymerisation. A catalyst ER176 added prior to use, initiates the polymerisation process. The system will NOT dry or cure without the addition of catalyst.
After the addition of catalyst the ink system will air dry to a tack free state in approximately 2 hours, but 7 days are required for the film to fully cure to maximum adhesion and chemical resistance. If force drying or baking, the time to complete cure is as follows:
120 Deg. C (250 Deg. F) for 10 minutes
150 Deg. C (300 Deg.F) for 7 minutes
180 Deg. C (350 Deg.F) for 4 minutes
We′ve been buying from you for a few years now and we have always been impressed with your solid and reliable service. Great technical advice over that period as well.
Graham and Greg - you are the best. You are always at hand when we need you. Due to the sublimation systems working so well, I dont need to bother either of you as much these days, however, when we have a technical or production issue you are always there at hand with the right solution. Thank you so very very much!
Why Choose GJS
If you require any further information on this product please click the button below and complete the form.