Epson Pre-Treatment Liquid

Epson's pre-treatment liquids have been designed for the preparation of textiles prior to DTG (direct-to-garment) printing to achieve optimum adhesion, vibrancy and washability.

Pre-treatment for natural fibres

Epson's standard pre-treatment liquid is designed to bind to natural fabrics that consist of fibres that are loosely wound, such as cotton and cotton blends containing 50% or higher cotton content. The bulk 20L concentrate is recommended to be diluted with distilled water at 1:1~1:2 before application to dark garments.

Pre-treatment for polyester garments

Epson's polyester pre-treatment Liquid is uniquely formulated for use with Epson UltraChrome DG inks to produce vivid prints with excellent wash-fastness on both light and dark coloured polyester garments. Best results are achieved with loose weave fabrics that contain 50% or higher polyester. Supplied in a bulk 18L concentrate, it is generally used diluted with distilled water at 1:4~1:6 before application to light colour garments and used undiluted with dark coloured garments.

The pre-treatment solution is OEKO-TEX ECO PASSPORT certified for product safety to the end consumer, and is free of GHS health risks, making it safe for operators as well.

Note: Usage, dilution, application and fixing information is provided as a guide only and may vary according to the substrate and equipment used. It is strongly recommended you test for compatibility to ensure optimal print results prior to completing any production run. Consult a GJS representative for further product specifications.